Scinor

in

Scinor® SMT600–P51
TIPS
P51 Datasheet
Datasheet: SMT600–P51
Pressurized Ultrafiltration Module
Diagram Pressurized Ultrafiltration Module

Scinor SMT600 series ultrafiltration modules utilizing our state-of- the-art Thermally Induced Phase Separation (TIPS) PVDF membranes provide the highest permeability, mechanical strength, and chemical tolerance in the industry. These modules are ideal for use in potable water, wastewater, desalination, and industrial applications. The SMT600-P51 retrofits major membrane vendor installations giving end-users a choice when replacing membranes.

The SMT600-P51 is an outside-in configuration module that operates in dead-end or cross-flow mode depending on specics of the application. Cleaning processes used are simple backwash, maintenance clean, and Clean-in-Place.

Product Advantages

Excellent Filtered Water Quality
• Tight 0.1 μm pore size distribution
• Low fiber breakage rate
Long Operational Life
• High mechanical strength and durability
• >5000 mg/L Sodium Hypochlorite tolerance
Low Capital Cost
• High flux rates on all water sources

Low Requirements for Pretreatment
• Outside-in configuration
• Optimal flow channel
Low Operating and Maintenance
Requirements

• Low energy and chemical consumption due to higher permeability
• Automatic operation

Retrofit modules available for all major membrane suppliers
  ISO 9001 ISO 14001
SPECIFICATIONS
Scinor® Module Part Number SMT600-P51
Fiber Material Polyvinylidene Fluoride (PVDF)
Effective Area 548 ft2 (51 m2)
Nominal Pore Size 0.1 μm
Fiber ID/OD 0.7 mm/1.3 mm
Geometry Ф225 mm×1860 mm
Port Size DN50
Housing/Head Material U-PVC/ABS
Potting Material Epoxy Resin
Operating Parameters Temperature 33-104° F (1-40 C)
pH Range 1-11 Continuous
Max. NaClO 5000 mg/L
Backwash Flux 30-70 gfd (50-120 lmh)
Air Scour Flow 3.1-7.5 scfm/module (5-12 Nm3/hr/module)
CIP pH Range 1-13
Max. Feed Pressure 60 psi (0.4 MPa)
Max. TMP 45 psi (0.3 MPa)
Operating TMP 3-22 psi (0.02-0.15 MPa)
Max. Air Scour Feed Pressure 36 psi (0.25 MPa)
Max. Backwash Feed Pressure 36 psi (0.25 MPa)
Filtered Water
Performance
Turbidity ≤0.1 ntu
Silt Density Index ≤3
E.Coli Removal non-detect
About Us Products Applications
Drinking Water
Wastewater
Desalination
Industrial
Direct Retrofit Service TIPS Fundamentals Contact Us

Scinor Water America, LLC
1440 Broadway, 23rd Floor
New York, NY 10018
800.774.1385
info@scinor.com | scinor.com

P23
P38
P40
P50
P51
P56
P72
P80
S26
S30
S50
Site Map | Privacy Policy © 2015 Scinor Water America, LLC | All Rights Reserved